Looking for a reliable concrete floor bead blaster that delivers fast, uniform, and dust-free surface preparation? This machine is widely used for concrete floor treatment, road maintenance, and steel surface preparation, providing a highly efficient alternative to grinding and chemical cleaning methods.
As a professional floor shot blasting machine, it uses high-speed steel shot impact to remove laitance, coatings, rust, and contaminants, while simultaneously creating a rough and clean surface profile for better coating adhesion.
👉 Get professional recommendation and quotation → Contact YG Machinery now.【WhatsApp/WeChat/Phone】+86 13837115193.
Concrete Floor Bead Blaster Parameters
| Model | YG-20 | YG-30 | YG-40 | YG-60 |
| Spraying distance | 20m | 30m | 40m | 60m |
| Engine | electric | electric | electric | electric |
| Electric | 380V/50HZ,3 phase | 380V/50HZ,3 phase | 380V/50HZ,3 phase | 380V/50HZ,3 phase |
| Fan motor | 3kw | 3kw | 4kw | 11kw |
| Steering motor | 2*1.5kw | 2*1.5kw | 2*1.5kw | 2*1.5kw |
| Pump motor | 1.5kw | 1.5kw | 2.5kw | 7.5kw |
| Horizontal angle | 360° | 360° | 360° | 360° |
| Vertical angle | Minus10°-55° | Minus10°-55° | Minus10°-55° | Minus10°-55° |
| The nozzle | 8 | 10 | 16 | 22 |
| Cylinder material | Q235 Carbon steel | Q235 Carbon steel | Q235 Carbon steel | Q235 Carbon steel |
| Bucket | 460L | 480L | 800L | |
| Water consumption | 1000L/h | 1500L/h | 3000L/h | 7500L/h |
| Recycled water pipe | 1400mm | 1400mm | 1400mm | 1400mm |
| The machine size | 1170*940*1700mm | 1170*940*1800mm | 1650*1200*2200mm | 1700*1200*2200mm |
| Weight | 200kg | 250kg | 300kg | 350kg |
Working Principle of Concrete Floor Shot Blaster
The concrete floor shot blaster works through a closed-loop blasting system:
- Steel shot is accelerated by a high-speed impeller
- Abrasives impact the surface at controlled velocity
- Contaminants and weak layers are removed instantly
- Dust and used abrasives are automatically recycled
y=f(x)=surface cleaning efficiency influenced by shot flow rate and machine speed
This ensures:
- Stable blasting performance
- Uniform surface roughness
- Clean and dust-free operation
Key Advantages of Floor Shot Blasting Machine
A road shot blasting machine is used for cleaning and treating concrete and asphalt road surfaces. It removes surface contaminants through high-speed steel shot impact and creates a rough profile for further construction work.
- High Efficiency Surface Treatment
YG shot blaster for sale can complete clean dirt, oil, old coatings, etc. on the road surface in one step, significantly reducing labor and project time.
2. Uniform Surface Roughness
Compared with grinding machines, the floor shot blasting machine ensures consistent texture, improving:
- Epoxy coating adhesion
- Waterproof layer bonding
- Anti-slip performance
3.Eco-Friendly Dust Control System
Equipped with an industrial dust collector:
- No chemical cleaning agents
- Low dust emission
- Environmentally compliant operation
4.Cost-Effective Operation
- Recyclable steel shot reduces consumable cost
- Low maintenance requirements
- Long service life of key components
👉 Request factory price → Get best offer from YG Machinery
5.Durable Industrial Design
Built with wear-resistant materials, ensuring stable performance in:
- Continuous industrial operation
- Heavy-duty construction environments
Applications of Concrete Floor Bead Blaster
The road shot blasting machine and floor models are widely used in:
1. Road Surface Cleaning
Removes oil stains, rubber marks, small stones, iron filings, and surface coatings.
Improves surface condition for:
- Better smoothness
- Fewer potholes
- Longer road service life
2. Road Repair and Renovation
Removes damaged layers such as cracks, potholes, and weak concrete surfaces.
This prepares the road for:
- Resurfacing
- Re-coating
- Structural repair work
3. Improve Road Friction
Creates a uniform rough surface that increases tire grip.
Effect in real conditions:
- Shorter braking distance
- Better vehicle control in rain or snow
- Reduced accident risk
4. Surface Preparation Before Construction
Cleans and levels the surface before applying coatings or waterproof layers.
Ensures:
- Strong adhesion between layers
- Uniform coating performance
- Better construction quality
5. Special Surface Treatment
Used for non-road applications such as:
- Bridge steel rust removal
- Anti-corrosion surface preparation
- Removal of phosphating layers on steel
- Pre-treatment before painting or coating
Key Technical Notes (Important for Operation)
To achieve best performance:
- Surface unevenness should be < 10mm
- No water or wet surface conditions
- Correct abrasive selection is required
- Concrete → cut steel shot
- Steel → round steel shot
- Blasting speed affects roughness quality
👉 Incorrect settings may cause uneven surface or shot leakage.
Wear Parts & Maintenance Overview
Main wear components include:
- Impeller & directional sleeve: ~20,000 m² lifespan
- Protective liners: ~50,000 m² lifespan
- Steel shot consumption: approx. 2–3 tons per 50,000 m²
👉 Regular maintenance ensures stable long-term performance.
FAQ – Customer Concerns Before Purchase
1.What surface quality can be achieved?
The machine can reach a uniform rough surface suitable for coatings and waterproof systems.
2.What rust removal level is possible?
👉 Achieves Sa2.5 to Sa3.0 standard, suitable for industrial coating requirements.
3.Is it suitable for large projects?
Yes. Different models are available for:
- Small floor projects -YG270 model
- Medium industrial floors -YG550 model
- Large infrastructure projects – YG850 model
👉 Tell us your project size → we recommend the right machine.
4.Is the machine easy to operate?
Yes. Most models support:
- One-person operation
- Self-propelled movement
- Simple control system
Why Choose YG Concrete Floor Bead Blaster?
YG Machinery is a professional manufacturer of floor shot blasting machines and road shot blasting equipment, providing:
- Factory direct pricing
- Fast global delivery
- Customized machine solutions
- Stable performance proven in international projects
- Full technical support & spare parts supply
👉 Need price or technical proposal? Click to contact YG now.
Final Conclusion
The Concrete Floor Bead Blaster is one of the most efficient solutions for modern surface preparation, offering high productivity, consistent quality, and low operating cost.
Whether you are working on concrete floors, road surfaces, or steel structures, this machine provides a reliable one-step cleaning and profiling solution.
👉 Get quotation today → Start your efficient surface preparation project with YG Machinery.
